pctechguide.com

SCSI Internal Mounting

Identify an available 5.25in drive bay into which to mount the drive.

Mounted

If you must use mounting rails, screw the rails into the lower pair of holes on either side of the drive. Make sure the metal portion is angled away from the device and facing forward.

Check their positioning by sliding the drive into the bay.

If necessary remove the mounting rails and fix them to the the other pair of holes.

Filed Under: How to Install a SCSI Device

Latest Articles

Hard Drive Configuration

In fact, it's not the particular IDE ribbon cable connector that determines whether or not a drive is a master or slave, but rather the way in which the drive's jumper pins are configured. EIDE hard drives typically have a jumper block located between the 40-pin IDE connector and the power … [Read More...]

Site Navigation

There are several methods of navigating the site, including the main menu, side menu, and a crumb trail. There are also context menus and previous/next links within guides, articles and tutorials, and finally a site map giving an overall site image. There were a number of principle aims … [Read More...]

How to Remove File Recovery

File Recovery Welcome! If you've made your way to this page, you've likely been infected with File Recovery. Infections of this kind are generally termed scareware, they attempt to force the user into paying for them by making the case that you're experiencing hardware failure, in this instance, by … [Read More...]

Guides

Recent Posts

SugarSync Review

PROS: SugarSync is very easy to use and install. CONS: Not all phones will be able to download SugarSync at this time. OVERVIEW: SugarSync is by … [Read More...]