pctechguide.com

  • Home
  • Guides
  • Tutorials
  • Articles
  • Reviews
  • Glossary
  • Contact

Architecture Manufacturing Process

What differentiates the microprocessor from its predecessors constructed out of valves, individual transistors or small integrated circuits is that it brought us, for the first time, a complete processor on a single chip of silicon.

Silicon is the basic material from which chips are made. It is a semiconductor which, when doped with impurities in a particular pattern, becomes a transistor, the basic building block of digital circuitry. The process involves etching the transistors, resistors, interconnecting tracks and so forth onto the surface of the silicon.

First a silicon ingot is grown. This must have a defect-free crystalline structure, an aspect which places limitations on its size. In the early days, ingots were limited to a diameter of 2in, although 8in is now commonplace. In the next stage, the ingot is cut up into slices called wafers. These are polished until they have a flawless, mirror-like surface. It is these wafers on which the chips are created. Typically dozens of microprocessors are made on a single wafer.

The circuitry is built up in layers. Layers are made from a variety of substances. For example, silicon dioxide is an insulator, and polysilicon makes up conducting tracks. When bare silicon is exposed, it can be bombarded with ions to produce transistors – this is called doping.

To create the required features, layers are added to cover the entire surface of the wafer, and the superfluous portions are etched away. To do this, the new layer is covered with photoresist, onto which is projected an image of the features required. After exposure, developing removes those portions of the photoresist which had been exposed to light, leaving a mask through which etching can take place. The remaining photoresist is then removed using a solvent.

This process continues, a layer at a time, until a complete circuit is built up. Needless to say, with the features being made measuring less than a millionth of a metre across, the tiniest speck of dust can create havoc. Particles of dust can be anywhere from one to 100 microns across – three to 300 times the size of a feature. Microprocessors are manufactured in clean rooms – ultra-clean environments where the operators wear space-age protective suits.

In the early days, semiconductor manufacturing was hit and miss, with a success rate of less than 50% of working chips. Today, far higher yields are obtained, but nobody expects 100%. As soon as all the layers have been added to a wafer, each chip is tested and any offenders are marked. The individual chips are now separated, and at this point are called dies. The faulty ones are discarded, while the good ones are packaged in Pin Grid Arrays – the ceramic rectangles with rows of pins on the bottom which most people think of as microprocessors.

The 4004 used a 10-micron process: the smallest feature was 10 millionths of a metre across. By today’s standards, this is huge. For example, a Pentium Pro under these constraints would be about 5.5in x 7.5in, and would be slow; fast transistors have to be small. By 1998 most processors used a 0.25-micron process. Both Intel and AMD had reduced this to 0.13-micron by 2002, with 0.1-micron remaining the mid-term goal.

  • Principles of CPU architecture – logic gates, MOSFETS and voltage
  • Basic structure of a Pentium microprocessor
  • Microprocessor Evolution
  • IA-32 (Intel Architecture 32 ) – base instruction set for 32 bit processors
  • Pentium P5 microarchitecture – superscalar and 64 bit data
  • Pentium Pro (P6) 6th generation x86 microarchitecture
  • Dual Independent Bus (DIB) – frontside and backside data bus CPU architecture
  • NetBurst – Pentium 4 7th generation x86 CPU microarchitecture
  • Intel Core – 8th generation CPU architecture
  • Moore’s Law in IT Architecture
  • Architecture Manufacturing Process
  • Copper Interconnect Architecture
  • TeraHertz Technology
  • Software Compatibility
  • IA-64 Architecture
  • Illustrated guide to high-k dielectrics and metal gate electrodes

Filed Under: CPU Architecture

Latest Articles

Digital Video Editing

Broadly speaking, there are two types of video editing. One involves editing directly from one tape to another and is called linear editing. The other requires that the sequences to be edited are transferred to hard disk, edited, and then transferred back to tape. This method is referred to as … [Read More...]

Cut Energy Costs in Data Center

If you have a data center, there is a good chance that it is eating up energy and costing you a pretty penny. The costs of maintaining a data center can quickly ge tou tof control. many people do not realize the costs that running a data center entail. This article will go over some of the ways that … [Read More...]

What is L2 (Level 2) cache memory?

Most PCs are offered with a Level 2 cache to bridge the processor/memory performance gap. Level 2 cache - also referred to as secondary cache) uses the same control logic as Level 1 cache and is also implemented in SRAM. Level 2 cache typically comes in two sizes, 256KB or 512KB, and … [Read More...]

Why Internet Bundles Are the Next Battleground for Gamers

A weak internet connection can turn seamless gaming sessions into frustrating experiences filled with lag, buffering or sudden disconnects. For … [Read More...]

Importance of Inbound Marketing in the Digital Age

A couple of months ago, Zacks reported that Hubspot was starting to make some major changes to its inbound marketing strategy. They talk a lot about … [Read More...]

Damage Control Strategies for Resolving Online PR Crises

Last July, Astrologer faced a major crisis after its CEO went viral at a ColdPlay concert when having an affair. This was just one of the many times a … [Read More...]

AI is Not Killing Computer Jobs Like Doomers Projected

There is no denying the reality that AI technology has played a massive role in disrupting our lives. A growing number of people claim that AI … [Read More...]

Everything You Need to Know About Sourcing Circuit Boards From U.S. Suppliers

In This Article This article includes: Why Source PCBs From the United States?How to Get a Quote From a U.S.-Based PCB ManufacturerThe Top U.S. … [Read More...]

Top Taplio Alternatives in 2025 : Why MagicPost Leads for LinkedIn Posting ?

LinkedIn has become a strong platform for professionals, creators, and businesses to establish authority, grow networks, and elicit engagement. Simple … [Read More...]

Guides

  • Computer Communications
  • Mobile Computing
  • PC Components
  • PC Data Storage
  • PC Input-Output
  • PC Multimedia
  • Processors (CPUs)

Recent Posts

Tom May: Virtual Reality Web Browsers Are Changing the Online Experience

Virtual reality is growing at a remarkable pace. It is estimated that the market will be worth $33 billion in the next three years. We have seen … [Read More...]

Motherboard CPU

As indicated above - and this is not uncommon - the motherboard upgrade is being accompanied by a switch to a new processor and main memory. In this … [Read More...]

Excel Shortcuts for More Complicated Commands

We previously wrote an article on the benefits of using keyboard shortcuts in Excel. The shortcuts we focused on were used for simple formatting … [Read More...]

[footer_backtotop]

Copyright © 2026 About | Privacy | Contact Information | Wrtie For Us | Disclaimer | Copyright License | Authors