pctechguide.com

Win98 Installation

After you’ve partitioned and formatted your hard disk, you’re ready to reinstall Windows 98:

  1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
  2. When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press Enter.
  3. If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive:

    Drive X: = Driver MSCD001

    Drive X: = Driver OEMCD001

    4. Note: This will likely be one letter in advance to what it usually is. The reason for this is that the config.sys file on the Windows 98 Startup Disk loads a 2MB RAMDrive that contains a number of tools useful in diagnosing common problems and that, in most cases, uses your CD-ROM drive’s usual drive letter.

  4. Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press Enter:

    X:setup

    where X is the drive letter that is assigned to your CD-ROM drive.

  5. When you receive the following message, press Enter, and then follow the instructions on the screen to complete the Setup procedure:

    Please wait while the Setup initialises. Setup is now going to perform a routine check on your system. To continue press Enter.

  6. Setup now performs the following routine checks on your computer:
    • Runs the real-mode version of ScanDisk. It creates the Scandisk.log file and checks for errors in the directory structure, file allocation table, and file system. A surface scan is not performed, the disk is not checked for physical errors, and long file name errors are not fixed. These errors are fixed only when you run ScanDisk in protected-mode (from Windows). If ScanDisk finds errors, it will let you know. You can view the log file by selecting View Log from the ScanDisk screen; otherwise, select Exit.
    • Initialises your system and copies the necessary files for installing Windows 98.
    • Displays the Windows 98 Setup screen. This screen has an information bar on the left-hand side that displays the five steps that Setup will perform and a timer that shows the estimated time remaining to complete the installation. To begin the Setup process, click Continue.
    • A more efficient Setup, which reduces the number of Setup steps from twelve to five and uses the existing computer configuration for identifying legacy hardware.
    • A Setup Wizard information bar,located on the left side of the Setup screen, that makes it easier for you to track installation progress.
    • A mandatory Windows 98 Startup Disk that contains generic, real-mode ATAPI CD-ROM and small computer system interface (SCSI) drivers, allowing you to start your computer in the event you cannot do so from its hard disk.
    • A new cabinet file (CAB file) structure that makes Setup faster by grouping CAB files by function (for example, all related CAB files for network installation) in the same CAB file, so that if certain files are not needed for a particular type of installation, they are not copied.
    • Enumeration of Plug and Play hardware occurs during the first boot portion of Setup. Enumeration is performed before detection to reduce hardware detection problems and errors. Existing devices are also verified during Setup. If verification fails, Setup performs full hardware detection.
    • When first started, Setup checks if any anti-virus programs are running. If there are, it displays a dialog box informing you to disable the software.
    • Preparing to run Windows 98 Setup
    • Collecting information about your computer
    • Copying Windows 98 files to your computer
    • Restarting your computer
    • Setting up hardware and finalising settings

    7. Windows

    Windows 95 had two supplemental releases – referred to as OEM Services Releases (OSR-1 and OSR-2) – to support new hardware and provide the latest Internet software. Windows 98 is both a retail and an original equipment manufacturer (OEM) release that incorporates all of the OSR-1, OSR-2, and Universal Serial Bus (USB) updates combined with new features and functionality, including the Internet Explorer 4 browsing software.

    Windows 98 Setup makes the installation process faster and reduces the amount of user input. It provides the following enhancements:

    The Windows 98 Setup now proceeds to the first step in its five phase installation process:

Filed Under: How To Do a Clean Installation of Win98

Latest Articles

How To Create A FAT32 Partition on Your Hard Drive

If you're installing Windows 98 onto a new, empty hard disk, you're going to have to first create a primary partition on the disk and then format a file system on that partition. If you're installing on a disk you've been using previously, you may want to delete it's existing partitions … [Read More...]

CD-ROM CLV

The first generation of single-speed CD-ROM drives were based on the design of audio CD drives, employing constant linear velocity (CLV) technology to spin a disc at the same speed as an audio CD which, with error correction, meant 150 … [Read More...]

Piezoelectric Printer Technology

Epson's proprietary inkjet technology uses a piezo crystal at the back of the ink reservoir. This is rather like a loudspeaker cone - it flexes when an electric current flows through it. So, whenever a dot is required, a current is applied to … [Read More...]

Comments

Guides

Recent Posts

How to Repair PST File

This PST repair guide works well on office 2003 pst repair issues, office 2007 pst repair issues and office 2010 pst repair issues.  It does not … [Read More...]