General principles

Digitisation is performed by a video capture card which converts each analogue frame of video into a series of bitmapped images to be displayed and manipulated on the PC. This takes one horizontal line at a time and, for the PAL system, splits each into 768 sections. At each of these sections, the red, green and blue values of the signal are calculated, resulting in 768 coloured pixels per line. The 768 pixel width arises out of the 4:3 aspect ratio of a TV picture. Out of the 625 lines in a PAL signal, about 50 are used for Teletext and contain no picture information, so they're not digitised. To get the 4:3 ratio, 575 lines times four divided by three gives 766.7. Since computers prefer to work with whole numbers, video capture cards usually digitise 576 lines, splitting each line into 768 segments, which gives an exact 4:3 ratio.

Thus, after digitisation, a full frame is made up of 768x576 pixels. Each pixel requires three bytes for storing the red, green and blue components of its colour (for 24-bit colour). Each frame therefore requires 768x576x3 bytes = 1.3MB. In fact, the PAL system takes two passes to draw a complete frame - each pass resolving alternate scan lines. The upshot is that one second of video requires a massive 32.5MB (1.3 x 25 fps). Adding a 16-bit audio track sampled at 44kHz increases this by a further 600KB per second. In practice, however, some boards digitise fewer than 576 lines and end up with less information, and most boards make use of the YUV scheme.

Scientists have discovered that the eye is more susceptible to brightness than it is to colour. The YUV model is a method of encoding pictures used in television broadcasting in which intensity is processed independently from colour. Y is for intensity and is measured in full resolution, while U and V are for colour difference signals and are measured at either half resolution (known as YUV 4:2:2) or at quarter resolution (known as YUV 4:1:1). Digitising a YUV signal instead of an RGB signal requires 16 bits (two bytes) instead of 24 bits (three bytes) to represent true colour, so one second of PAL video ends up requiring about 22MB.

The NTSC system used by America and Japan has 525 lines and runs at 30 fps - the latter being a consequence of the fact that their electric current alternates at 60Hz rather than the 50Hz found in Europe. NTSC frames are usually digitised at 640x480, which fits exactly into VGA resolution. This is not a co-incidence, but is a result of the PC having been designed in the US and the first IBM PCs having the capability to be plugged into a TV.

From mid-2003 DVD Players that also supported the MPEG-4 codec began to emerge.

Defined by the Moving Picture Experts Group (MPEG), the working group within the International Organisation for Standardisation (ISO), the MPEG-4 specification was finalised in 1998 and became an international standard in 2000. It is designed to deliver DVD (MPEG-2) quality video at lower data rates and smaller file sizes. The standard incorporates the Advanced Audio Coding (AAC) codec. Developed by the same people who created the popular .mp3 file format, AAC provides much more efficient compression than MP3 with a quality rivalling that of uncompressed CD audio.

MPEG-4 is currently battling with Microsoft's VC-1 technology to become the codec used by the each of the rival systems vying to become the successor to the DVD format - HD DVD and Blu-ray.